\documentclass[12pt,titlepage]{article}

\usepackage{amsmath}
\usepackage{mathrsfs}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{amsthm}
\usepackage{mathtools}
\usepackage{graphicx}
\usepackage{color}
\usepackage{ucs}
\usepackage[utf8x]{inputenc}
\usepackage{xparse}
\usepackage{hyperref}

%----Macros----------
%
% Unresolved issues:
%
%  \righttoleftarrow
%  \lefttorightarrow
%
%  \color{} with HTML colorspec
%  \bgcolor
%  \array with options (without options, it's equivalent to the matrix environment)

% Of the standard HTML named colors, white, black, red, green, blue and yellow
% are predefined in the color package. Here are the rest.
\definecolor{aqua}{rgb}{0, 1.0, 1.0}
\definecolor{fuschia}{rgb}{1.0, 0, 1.0}
\definecolor{gray}{rgb}{0.502, 0.502, 0.502}
\definecolor{lime}{rgb}{0, 1.0, 0}
\definecolor{maroon}{rgb}{0.502, 0, 0}
\definecolor{navy}{rgb}{0, 0, 0.502}
\definecolor{olive}{rgb}{0.502, 0.502, 0}
\definecolor{purple}{rgb}{0.502, 0, 0.502}
\definecolor{silver}{rgb}{0.753, 0.753, 0.753}
\definecolor{teal}{rgb}{0, 0.502, 0.502}

% Because of conflicts, \space and \mathop are converted to
% \itexspace and \operatorname during preprocessing.

% itex: \space{ht}{dp}{wd}
%
% Height and baseline depth measurements are in units of tenths of an ex while
% the width is measured in tenths of an em.
\makeatletter
\newdimen\itex@wd%
\newdimen\itex@dp%
\newdimen\itex@thd%
\def\itexspace#1#2#3{\itex@wd=#3em%
\itex@wd=0.1\itex@wd%
\itex@dp=#2ex%
\itex@dp=0.1\itex@dp%
\itex@thd=#1ex%
\itex@thd=0.1\itex@thd%
\advance\itex@thd\the\itex@dp%
\makebox[\the\itex@wd]{\rule[-\the\itex@dp]{0cm}{\the\itex@thd}}}
\makeatother

% \tensor and \multiscript
\makeatletter
\newif\if@sup
\newtoks\@sups
\def\append@sup#1{\edef\act{\noexpand\@sups={\the\@sups #1}}\act}%
\def\reset@sup{\@supfalse\@sups={}}%
\def\mk@scripts#1#2{\if #2/ \if@sup ^{\the\@sups}\fi \else%
  \ifx #1_ \if@sup ^{\the\@sups}\reset@sup \fi {}_{#2}%
  \else \append@sup#2 \@suptrue \fi%
  \expandafter\mk@scripts\fi}
\def\tensor#1#2{\reset@sup#1\mk@scripts#2_/}
\def\multiscripts#1#2#3{\reset@sup{}\mk@scripts#1_/#2%
  \reset@sup\mk@scripts#3_/}
\makeatother

% \slash
\makeatletter
\newbox\slashbox \setbox\slashbox=\hbox{$/$}
\def\itex@pslash#1{\setbox\@tempboxa=\hbox{$#1$}
  \@tempdima=0.5\wd\slashbox \advance\@tempdima 0.5\wd\@tempboxa
  \copy\slashbox \kern-\@tempdima \box\@tempboxa}
\def\slash{\protect\itex@pslash}
\makeatother

% math-mode versions of \rlap, etc
% from Alexander Perlis, "A complement to \smash, \llap, and lap"
%   http://math.arizona.edu/~aprl/publications/mathclap/
\def\clap#1{\hbox to 0pt{\hss#1\hss}}
\def\mathllap{\mathpalette\mathllapinternal}
\def\mathrlap{\mathpalette\mathrlapinternal}
\def\mathclap{\mathpalette\mathclapinternal}
\def\mathllapinternal#1#2{\llap{$\mathsurround=0pt#1{#2}$}}
\def\mathrlapinternal#1#2{\rlap{$\mathsurround=0pt#1{#2}$}}
\def\mathclapinternal#1#2{\clap{$\mathsurround=0pt#1{#2}$}}

% Renames \sqrt as \oldsqrt and redefine root to result in \sqrt[#1]{#2}
\let\oldroot\root
\def\root#1#2{\oldroot #1 \of{#2}}
\renewcommand{\sqrt}[2][]{\oldroot #1 \of{#2}}

% Manually declare the txfonts symbolsC font
\DeclareSymbolFont{symbolsC}{U}{txsyc}{m}{n}
\SetSymbolFont{symbolsC}{bold}{U}{txsyc}{bx}{n}
\DeclareFontSubstitution{U}{txsyc}{m}{n}

% Manually declare the stmaryrd font
\DeclareSymbolFont{stmry}{U}{stmry}{m}{n}
\SetSymbolFont{stmry}{bold}{U}{stmry}{b}{n}

% Manually declare the MnSymbolE font
\DeclareFontFamily{OMX}{MnSymbolE}{}
\DeclareSymbolFont{mnomx}{OMX}{MnSymbolE}{m}{n}
\SetSymbolFont{mnomx}{bold}{OMX}{MnSymbolE}{b}{n}
\DeclareFontShape{OMX}{MnSymbolE}{m}{n}{
    <-6>  MnSymbolE5
   <6-7>  MnSymbolE6
   <7-8>  MnSymbolE7
   <8-9>  MnSymbolE8
   <9-10> MnSymbolE9
  <10-12> MnSymbolE10
  <12->   MnSymbolE12}{}

% Declare specific arrows from txfonts without loading the full package
\makeatletter
\def\re@DeclareMathSymbol#1#2#3#4{%
    \let#1=\undefined
    \DeclareMathSymbol{#1}{#2}{#3}{#4}}
\re@DeclareMathSymbol{\neArrow}{\mathrel}{symbolsC}{116}
\re@DeclareMathSymbol{\neArr}{\mathrel}{symbolsC}{116}
\re@DeclareMathSymbol{\seArrow}{\mathrel}{symbolsC}{117}
\re@DeclareMathSymbol{\seArr}{\mathrel}{symbolsC}{117}
\re@DeclareMathSymbol{\nwArrow}{\mathrel}{symbolsC}{118}
\re@DeclareMathSymbol{\nwArr}{\mathrel}{symbolsC}{118}
\re@DeclareMathSymbol{\swArrow}{\mathrel}{symbolsC}{119}
\re@DeclareMathSymbol{\swArr}{\mathrel}{symbolsC}{119}
\re@DeclareMathSymbol{\nequiv}{\mathrel}{symbolsC}{46}
\re@DeclareMathSymbol{\Perp}{\mathrel}{symbolsC}{121}
\re@DeclareMathSymbol{\Vbar}{\mathrel}{symbolsC}{121}
\re@DeclareMathSymbol{\sslash}{\mathrel}{stmry}{12}
\re@DeclareMathSymbol{\bigsqcap}{\mathop}{stmry}{"64}
\re@DeclareMathSymbol{\biginterleave}{\mathop}{stmry}{"6}
\re@DeclareMathSymbol{\invamp}{\mathrel}{symbolsC}{77}
\re@DeclareMathSymbol{\parr}{\mathrel}{symbolsC}{77}
\makeatother

% \llangle, \rrangle, \lmoustache and \rmoustache from MnSymbolE
\makeatletter
\def\Decl@Mn@Delim#1#2#3#4{%
  \if\relax\noexpand#1%
    \let#1\undefined
  \fi
  \DeclareMathDelimiter{#1}{#2}{#3}{#4}{#3}{#4}}
\def\Decl@Mn@Open#1#2#3{\Decl@Mn@Delim{#1}{\mathopen}{#2}{#3}}
\def\Decl@Mn@Close#1#2#3{\Decl@Mn@Delim{#1}{\mathclose}{#2}{#3}}
\Decl@Mn@Open{\llangle}{mnomx}{'164}
\Decl@Mn@Close{\rrangle}{mnomx}{'171}
\Decl@Mn@Open{\lmoustache}{mnomx}{'245}
\Decl@Mn@Close{\rmoustache}{mnomx}{'244}
\makeatother

% Widecheck
\makeatletter
\DeclareRobustCommand\widecheck[1]{{\mathpalette\@widecheck{#1}}}
\def\@widecheck#1#2{%
    \setbox\z@\hbox{\m@th$#1#2$}%
    \setbox\tw@\hbox{\m@th$#1%
       \widehat{%
          \vrule\@width\z@\@height\ht\z@
          \vrule\@height\z@\@width\wd\z@}$}%
    \dp\tw@-\ht\z@
    \@tempdima\ht\z@ \advance\@tempdima2\ht\tw@ \divide\@tempdima\thr@@
    \setbox\tw@\hbox{%
       \raise\@tempdima\hbox{\scalebox{1}[-1]{\lower\@tempdima\box
\tw@}}}%
    {\ooalign{\box\tw@ \cr \box\z@}}}
\makeatother

% \mathraisebox{voffset}[height][depth]{something}
\makeatletter
\NewDocumentCommand\mathraisebox{moom}{%
\IfNoValueTF{#2}{\def\@temp##1##2{\raisebox{#1}{$\m@th##1##2$}}}{%
\IfNoValueTF{#3}{\def\@temp##1##2{\raisebox{#1}[#2]{$\m@th##1##2$}}%
}{\def\@temp##1##2{\raisebox{#1}[#2][#3]{$\m@th##1##2$}}}}%
\mathpalette\@temp{#4}}
\makeatletter

% udots (taken from yhmath)
\makeatletter
\def\udots{\mathinner{\mkern2mu\raise\p@\hbox{.}
\mkern2mu\raise4\p@\hbox{.}\mkern1mu
\raise7\p@\vbox{\kern7\p@\hbox{.}}\mkern1mu}}
\makeatother

%% Fix array
\newcommand{\itexarray}[1]{\begin{matrix}#1\end{matrix}}
%% \itexnum is a noop
\newcommand{\itexnum}[1]{#1}

%% Renaming existing commands
\newcommand{\underoverset}[3]{\underset{#1}{\overset{#2}{#3}}}
\newcommand{\widevec}{\overrightarrow}
\newcommand{\darr}{\downarrow}
\newcommand{\nearr}{\nearrow}
\newcommand{\nwarr}{\nwarrow}
\newcommand{\searr}{\searrow}
\newcommand{\swarr}{\swarrow}
\newcommand{\curvearrowbotright}{\curvearrowright}
\newcommand{\uparr}{\uparrow}
\newcommand{\downuparrow}{\updownarrow}
\newcommand{\duparr}{\updownarrow}
\newcommand{\updarr}{\updownarrow}
\newcommand{\gt}{>}
\newcommand{\lt}{<}
\newcommand{\map}{\mapsto}
\newcommand{\embedsin}{\hookrightarrow}
\newcommand{\Alpha}{A}
\newcommand{\Beta}{B}
\newcommand{\Zeta}{Z}
\newcommand{\Eta}{H}
\newcommand{\Iota}{I}
\newcommand{\Kappa}{K}
\newcommand{\Mu}{M}
\newcommand{\Nu}{N}
\newcommand{\Rho}{P}
\newcommand{\Tau}{T}
\newcommand{\Upsi}{\Upsilon}
\newcommand{\omicron}{o}
\newcommand{\lang}{\langle}
\newcommand{\rang}{\rangle}
\newcommand{\Union}{\bigcup}
\newcommand{\Intersection}{\bigcap}
\newcommand{\Oplus}{\bigoplus}
\newcommand{\Otimes}{\bigotimes}
\newcommand{\Wedge}{\bigwedge}
\newcommand{\Vee}{\bigvee}
\newcommand{\coproduct}{\coprod}
\newcommand{\product}{\prod}
\newcommand{\closure}{\overline}
\newcommand{\integral}{\int}
\newcommand{\doubleintegral}{\iint}
\newcommand{\tripleintegral}{\iiint}
\newcommand{\quadrupleintegral}{\iiiint}
\newcommand{\conint}{\oint}
\newcommand{\contourintegral}{\oint}
\newcommand{\infinity}{\infty}
\newcommand{\bottom}{\bot}
\newcommand{\minusb}{\boxminus}
\newcommand{\plusb}{\boxplus}
\newcommand{\timesb}{\boxtimes}
\newcommand{\intersection}{\cap}
\newcommand{\union}{\cup}
\newcommand{\Del}{\nabla}
\newcommand{\odash}{\circleddash}
\newcommand{\negspace}{\!}
\newcommand{\widebar}{\overline}
\newcommand{\textsize}{\normalsize}
\renewcommand{\scriptsize}{\scriptstyle}
\newcommand{\scriptscriptsize}{\scriptscriptstyle}
\newcommand{\mathfr}{\mathfrak}
\newcommand{\statusline}[2]{#2}
\newcommand{\tooltip}[2]{#2}
\newcommand{\toggle}[2]{#2}

% Theorem Environments
\theoremstyle{plain}
\newtheorem{theorem}{Theorem}
\newtheorem{lemma}{Lemma}
\newtheorem{prop}{Proposition}
\newtheorem{cor}{Corollary}
\newtheorem*{utheorem}{Theorem}
\newtheorem*{ulemma}{Lemma}
\newtheorem*{uprop}{Proposition}
\newtheorem*{ucor}{Corollary}
\theoremstyle{definition}
\newtheorem{defn}{Definition}
\newtheorem{example}{Example}
\newtheorem*{udefn}{Definition}
\newtheorem*{uexample}{Example}
\theoremstyle{remark}
\newtheorem{remark}{Remark}
\newtheorem{note}{Note}
\newtheorem*{uremark}{Remark}
\newtheorem*{unote}{Note}

%-------------------------------------------------------------------

\begin{document}

%-------------------------------------------------------------------


\section*{multiagent system}

[[!redirects knowledge in a multiagent system]]

\hypertarget{multiagent_systems}{}\section*{{Multiagent systems}}\label{multiagent_systems}

\noindent\hyperlink{idea}{Idea}\dotfill \pageref*{idea} \linebreak
\noindent\hyperlink{introduction}{Introduction}\dotfill \pageref*{introduction} \linebreak
\noindent\hyperlink{models_for_these_logics}{Models for these logics}\dotfill \pageref*{models_for_these_logics} \linebreak
\noindent\hyperlink{interpreted_systems}{Interpreted systems}\dotfill \pageref*{interpreted_systems} \linebreak
\noindent\hyperlink{references}{References}\dotfill \pageref*{references} \linebreak
\noindent\hyperlink{wikipedia}{Wikipedia}\dotfill \pageref*{wikipedia} \linebreak
\noindent\hyperlink{books}{Books}\dotfill \pageref*{books} \linebreak
\noindent\hyperlink{articles}{Articles}\dotfill \pageref*{articles} \linebreak


\hypertarget{idea}{}\subsection*{{Idea}}\label{idea}

To quote from a book on the subject:

\begin{quote}%
``Multiagent systems are a new paradigm for understanding and building distributed systems, where it is assumed that the computational components are autonomous: able to control their own behaviour in the furtherance of their own goals.'' (\hyperlink{Wooldridge09}{Wooldridge09})


\end{quote}
The area is a very wide one and this entry only deals with some generalities especially links between local `knowledge' and more global forms and the models of this that involve the use of various types of [[modal logic]].

\hypertarget{introduction}{}\subsection*{{Introduction}}\label{introduction}

In many studies of [[distributed system]]s, a multiagent model is used.

\begin{itemize}%
\item An agent is a processor, sensor or finite state machine, interconnected by a communication network with other `agents'.

\end{itemize}
Typically each agent has a local state that is a function of its initial state, the messages received from other agents, observations of the external environment and possible internal actions. It has become customary when using formal models of distributed systems to use modal [[epistemic logics]] as one of the tools for studying the knowledge of such systems. The basic such logic for handling a system with $n$-agents is one known as [[the logic S5(m)|S5(n)]]. Unless the system is very simple the actual logic will be an extension of that basic one, that is, it may have more axioms.

For instance, the way the various agents are connected influences the logic in subtle ways. Suppose that agent 1 sends all its information immediately to agents 2 and 3, then if we denote by $K_i \phi$, the statement that agent $i$ `knows' proposition $\phi$, we clearly expect within the logic of that system that we have as an axiom:

\begin{displaymath}
K_1 \phi \Rightarrow K_2\phi \wedge K_3 \phi,
\end{displaymath}
in other words, if 1 knows something then we have that both 2 and 3 know it.

The logic $S5_n$ is obtained from ordinary [[propositional logic]] by adding `knowledge operators', $K_i$, as above. (In the literature the notation $K_i\phi$ is often replaced by $\Box_i\phi$.) It models a community of \emph{ideal} knowledge agents who have the properties of

\begin{itemize}%
\item veridical knowledge (everything they know is true),


\item positive introspection (they know what they know)



\end{itemize}
and

\begin{itemize}%
\item negative introspection (they know what they do not know).

\end{itemize}
These properties are reflected in the axiom system for the logic. For more on this see the entry [[the logic S5(m)|S5(n)]].

\hypertarget{models_for_these_logics}{}\subsection*{{Models for these logics}}\label{models_for_these_logics}

The classical models for multimodal logics, and for $S5_n$ and its extensions in particular, are combinatorial models known as [[Kripke frames]] and, for $S5_n$, Kripke equivalence frames. These consist of a set $W$, called the \emph{set of possible worlds}, and $n$-equivalence relations $\sim_i$, one for each agent. The interpretation of $\sim_i$ is that if $w_1$, $w_2$ are two possible worlds and $w_1\sim_i w_2$, then agent $i$ cannot tell these two worlds apart.

\hypertarget{interpreted_systems}{}\subsection*{{Interpreted systems}}\label{interpreted_systems}

Fagin, Halpern, Moses and Vardi, in various combinations, have put forward a simpler combinatorial model known as an \emph{interpreted system}. These have the same formal expressive power as Kripke frames, but are nearer the intuition of interacting agents than is the more abstract Kripke model.

As before one has a set, $A = \{1,2, \ldots, n\}$, of agents, and now one assumes each agent $i$ can be in any state of a set $L_i$ of local states. In addition one assumes given a set $L_e$ of possible states of the `environment'.  More formally:

\begin{udefn}
A set of global states (SGS) for an interpreted system is a subset $S$ of the product $L_e \times L_1 \times \ldots \times L_n$ with each $L_e$, $L_i$ non-empty. If $S = L_e \times L_1 \times \ldots \times L_n$, then the SGS is called a \emph{hypercube}.

\end{udefn}
\hypertarget{references}{}\subsection*{{References}}\label{references}

\hypertarget{wikipedia}{}\subsubsection*{{Wikipedia}}\label{wikipedia}

\begin{itemize}%
\item \href{http://en.wikipedia.org/wiki/Multi-agent_system}{Wikipedia article}

\end{itemize}
\hypertarget{books}{}\subsubsection*{{Books}}\label{books}

\begin{itemize}%
\item [[Michael Wooldridge]], \emph{An Introduction to MultiAgent Systems}, Wiley, 2009

\end{itemize}
\hypertarget{articles}{}\subsubsection*{{Articles}}\label{articles}

\begin{itemize}%
\item [[A. Lomuscio]], [[M. D. Ryan]], \emph{An algorithmic approach to knowledge evolution}, Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), Vol. 13, No. 2 (Special issue on Temporal Logic in Engineering), 23pp, 1999.


\item [[A. Lomuscio]], R. van der Meyden, [[M. D. Ryan]], \emph{Knowledge in multi-agent systems: initial configurations and broadcast}, ACM Transactions on Computational Logic (TOCL), Volume 1, Issue 2, pp. 247- 284. ACM Press. October 2000.



\end{itemize}
category: computer science



\end{document}