**natural deduction** metalanguage, practical foundations

**type theory** (dependent, intensional, observational type theory, homotopy type theory)

**computational trinitarianism** =

**propositions as types** +**programs as proofs** +**relation type theory/category theory**

In dependent type theory, a *dependent sum type* of a dependent type $x\colon A\vdash B(x)\colon Type$ is the type whose terms are ordered pairs $(a,b)$ with $a\colon A$ and $b\colon B(a)$ (hence also called *dependent pair type*).

In a model of the type theory in categorical semantics, this is a dependent sum (indexed disjoint union). It includes product types as the special case when B is not dependent on A, and sum types as a special case when A is the type of Booleans.

type theory | category theory | |
---|---|---|

syntax | semantics | |

natural deduction | universal construction | |

dependent sum type | dependent sum | |

type formation | $\frac{\vdash\: A \colon Type \;\;\;\;\; x \colon A \;\vdash\; B(x)\colon Type}{\vdash \; \left(\sum_{x \colon A} B\left(x\right)\right) \colon Type}$ | $\left(A \in \mathcal{C}, \array{ B \\ \downarrow^{\mathrlap{p_1}} \\ A} \; \in \mathcal{C}/A \right) \Rightarrow \left( B \in \mathcal{C}\right)$ |

term introduction | $\frac{\vdash\: a \colon A \;\;\;\;\; \vdash\; b \colon B(a)}{\vdash (a,b) \colon \sum_{x \colon A} B\left(x\right) }$ | $\array{ Q &\stackrel{(a,b)}{\to}& B \\ & {}_{\mathllap{a}}\searrow & \\ && A }$ |

term elimination | $\frac{\vdash\; t \colon \left(\sum_{x \colon A} B\left(x\right)\right)}{\vdash\; p_1(t) \colon A\;\;\;\;\; \vdash\; p_2(t) \colon B(p_1(t))}$ | $\array{ Q &\stackrel{t}{\to}& B \\ & & \downarrow^{\mathrlap{p_1}} \\ && A }$ |

computation rule | $p_1(a,b) = a\;\;\;\; p_2(a,b) = b$ | $\array{ Q &\stackrel{(a,b)}{\to}& B \\ & {}_{\mathllap{a}}\searrow & \downarrow^{\mathrlap{p_1}} \\ && A }$ |

Like any type constructor in type theory, the dependent sum type is specified by rules saying when we can introduce it as a type, how to construct terms of that type, how to use or “eliminate” terms of that type, and how to compute when we combine the constructors with the eliminators.

The presentation of dependent sum type is almost exactly the same as that of product types, with the simple change that $B$ may depend on $A$. In particular, they can be presented both as a negative type or as a positive type. In both cases, the rule for building the dependent sum type is the same:

$\frac{A\colon Type \qquad x\colon A\vdash B(x)\colon Type}{\sum_{x\colon A} B(x)\colon Type}$

but the constructors and eliminators may be different.

When presented negatively, primacy is given to the eliminators. We specify that there are two ways to eliminate a term of type $\sum_{x\colon A} B(x)$: by projecting out the first component, or by projecting out the second.

$\frac{p \colon \sum_{x\colon A} B(x)}{\pi_1 p\colon A} \qquad \frac{p\colon \sum_{x\colon A} B(x)}{\pi_2 p\colon B(\pi_1 p)}$

This then determines the form of the constructors: in order to construct a term of type $\sum_{x\colon A} B(x)$, we have to specify what value that term should yield when all the eliminators are applied to it. In other words, we have to specify a pair of elements, one $a\colon A$ (to be the value of $\pi_1 p$) and one $b\colon B(a)$ (to be the value of $\pi_2 p$).

$\frac{a\colon A \qquad b\colon B(a)}{(a,b)\colon \sum_{x\colon A} B(x)}$

Finally, we have computation rules which say that the relationship between the constructors and the eliminators is as we hoped. We always have beta reduction rules

$\pi_1(a,b) \to_\beta a \qquad \pi_2(a,b) \to_\beta b$

and we may or may not choose to have an eta reduction rule

$(\pi_1 p, \pi_2 p) \to_\eta p$

When presented positively, primacy is given to the constructors. We specify that the way to construct something of type $\sum_{x\colon A} B(x)$ is to give a term $a\colon A$ and a term $b\colon B(a)$:

$\frac{a\colon A \qquad b\colon B(a)}{(a,b)\colon \sum_{x\colon A} B(x)}$

Of course, this is the same as the constructor obtained from the negative presentation. However, the eliminator is different. Now, in order to say how to *use* something of type $\sum_{x\colon A} B(x)$, we have to specify how we should behave for all possible ways that it could have been constructed. In other words, we have to say, *assuming* that $p$ were of the form $(a,b)$, what we want to do. Thus we end up with the following rule:

$\frac{z\colon \sum_{x\colon A} B(x) \vdash C(z)\colon Type\qquad
p\colon \sum_{x\colon A} B(x) \qquad x\colon A, y\colon B(x) \vdash c\colon C((x,y))}{let (x,y) = p in c \;\colon C(p)}$

We need a term $c$ in the context of two variables of types $A$ and $B$, and the destructor or match “binds those variables” to the two components of $p$. Note that the “ordered pair” $(x,y)$ in the destructor is just a part of the syntax; it is not an instance of the *constructor* ordered pair.

Now we have the beta reduction rule:

$let (x,y) = (a,b) \,in c \;\to_\beta\; c[a/x, b/y]$

In other words, if we build an ordered pair and then break it apart, what we get is just the things we put into it. (The notation $c[a/x, b/y]$ means to substitute $a$ for $x$ and $b$ for $y$ in the term $c$).

And (if we wish) the eta reduction rule, which is a little more subtle:

$let (x,y) = p in c[(x,y)/z] \;\to_\eta\; c[p/z]$

This says that if we break something of type $\sum_{x\colon A} B(x)$ into its components, but then we only use those two components by way of putting them back together into an ordered pair, then we might as well just not have broken it down in the first place.

Positively defined dependent sum types are naturally expressed as inductive types. For instance, in Coq syntax we have

```
Inductive sig (A:Type) (B:A->Type) : Type :=
| exist : forall (x:A), B x -> sig A B.
```

(Coq then implements beta-reduction, but not eta-reduction. However, eta-equivalence is provable with the internally defined identity type, using the dependent eliminator mentioned above.)

Arguably, negatively defined products should be naturally expressed as coinductive types, but this is not exactly the case for the presentation of coinductive types used in Coq.

In ordinary “nonlinear” type theory, the positive and negative dependent sum types are equivalent, just as in the case of product types. They manifestly have the same constructor, while we can define the eliminators in terms of each other as follows:

$\begin{aligned}
\pi_1 p &\;\coloneqq\; let (x,y) = p \,in\, x\\
\pi_2 p &\;\coloneqq\; let (x,y) = p \,in\, y\\
let (x,y) = p in c &\;\coloneqq\; c[\pi_1 p / x, \pi_2 p / y]
\end{aligned}$

The computation rules then also correspond, just as for product types.

Also just as for product types, in order to recover the important *dependent* eliminator for the positive product type from the eliminators for the negative product type, we need the latter to satisfy the $\eta$-conversion rule so as to make the above definition well-typed. By inserting a transport, we can make do with a propositional $\eta$-conversion, which is also provable from the dependent eliminator.

One might expect that in “dependent linear type theory” the positive and negative dependent sums would become different. However, the meaning of the quoted phrase is unclear.

Under categorical semantics, a dependent type $x\colon A \vdash B(x)\colon Type$ corresponds to a fibration or display map $B\to A$. In this case, the dependent sum is just the object $B$. This requires the dependent sum type to satisfy both $\beta$- and $\eta$-conversion.

Last revised on July 11, 2022 at 19:27:07. See the history of this page for a list of all contributions to it.